[Radio] Radiometrix NTX2 PCB Breakout

link). I have made these breakouts in a free version of Eagle (which is great, you can download it here). Also, i have a few of these boards spare and i don’t use them: if you like, you can have one.

Images

[caption id="attachment_803" align="aligncenter" width="300" caption="The PCB"][/caption] [caption id="attachment_804" align="aligncenter" width="169" caption="Another"][/caption] [caption id="attachment_805" align="aligncenter" width="297" caption="Another very neatly organized schematic"][/caption]

Result

[flickr-gallery mode=”photoset” photoset=”72157626442282492″]

Downloads

PCB_Ntx2_breakout_compiled.zip (Compiled & ready to be fabricated)PCB_Ntx2_breakout_raw.zip (For you to edit in Eagle) ]]>

You may also like...

2 Responses

  1. peter hu says:

    Dear Sir/Madam,
    Good day,
    This is a pcb manufacturer from ShenZhen,China,so grateful to know you are in the
    pcb market too,so if any requirements we can do for you,please feel free to contact us,
    transmit it please,If you are not purchaser, thank you very much.
    Regards.
    Peter

  1. April 13, 2011

    […] hook up two leds or a radio to the two corersponding pins. For hooking up a radio you can check this page. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 […]