[Chip] Seeeduino Stalker

This is an overview of all the pins in the “Seeeduino Stalker” fabricated by Seeedstudios. Because it is totally unclear which pins are used for reading of battery statusses, requesting temperature, interfacing with the microSD card, internal clock, led, xbee; i have made a table which contains exactly which pins to use or optionally to use. Now you can quickly see which pins are still available for use, or which are optional. Seeedstudios has got an entry about this on their own page, but its two pages long, so that you lose all overview. Here it is:

Pins

Schematic Alias Normal Connected (default) Optional
PD00 TX 0
PD01 RX 1
PD02 INT0 2 Clock (wakeup)
PD03 INT1 3 Xbee (wir.prog)/TF(stat)
PD04 T0 4 TF (power)
PD05 T1 5 Battery CH led Xbee (power)
PD06 AIN0 6 Battery Read
PD07 AIN1 7 Battery OK
PB1 ICP 8 LED
PB2 OC1 9 TF (SS)
PB2 SS 10 TF
PB3 MOSI 11 TF
PB4 MISO 12 TF
PB5 SCK 13 TF
PC0 ADC0 A0
PC1 ADC1 A1
PC2 ADC2 A2
PC3 ADC3 A3
PC4 ADC4 (SDA) A4 IIC (1wire)
PC5 ADC5 (SCL) A5 IIC (1wire)
PC7 ADC7 (VOL) A7 Battery voltage

Tim Zaman

MSc Biorobotics. Specialization in computer vision and deep learning. Works at NVIDIA.

You may also like...