[Radio] Radiometrix NTX2 PCB Breakout

This is the PCB file for the Radiometrix NTX2 (433MHz 10mW) module breakout. It’s a great radiomodule for transmitting signals to use with your arduino. I have used this for the Space Camera projects (link).

I have made these breakouts in a free version of Eagle (which is great, you can download it here).

Also, i have a few of these boards spare and i don’t use them: if you like, you can have one.




Another very neatly organized schematic


[flickr-gallery mode=”photoset” photoset=”72157626442282492″]


PCB_Ntx2_breakout_compiled.zip (Compiled & ready to be fabricated)PCB_Ntx2_breakout_raw.zip (For you to edit in Eagle)

Tim Zaman

MSc Biorobotics. Specialization in computer vision and deep learning. Works at NVIDIA.

You may also like...

2 Responses

  1. peter hu says:

    Dear Sir/Madam,
    Good day,

    This is a pcb manufacturer from ShenZhen,China,so grateful to know you are in the

    pcb market too,so if any requirements we can do for you,please feel free to contact us,

    transmit it please,If you are not purchaser, thank you very much.


  1. April 13, 2011

    […] hook up two leds or a radio to the two corersponding pins. For hooking up a radio you can check this page. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 […]