Category: C++

[Radio] RTTY Library for Arduino

This is an library that handles radio information over RTTY in arduino, written in C++. You can choose either ascii 7 bit or ascii 8 bit. You need two pins that you define with...

[Radio] RTTY

This is RTTY (Radioteletype) code that you can use for your C++ application (for instance Arduino). This can be used for the transfer of information through radio (or optics, see below). I have used...

[Checksum] XOR

Rekent een XOR checksum uit in c++ (bijv voor Arduino). Je kunt het gebruiken om ofwel een zin te decoderen of hem aan je zin toe te voegen. Deze zelfde checksum is gebruikt in...

[Flightcomputer] HoHoHo 1

This was the flightcomputer (Arduino C++ based) used for This Project. It gets serial data from TWO GPS devices, the atmel processor of the arduino parses it to a NTX2 443mhz radio output, and...

[SMS] Sony Ericsson PDU

For nothing have I had more requests than this piece of code. It’s use is obvious; forcing a turned on Sony Ericsson that supports a real serial interface to send a sms, receive, read,...

[Flightcomputer] HoHoHo 3

This is the flightcomputer for the infamous HoHoHo3 high altitude balloon flight. It uses GPS serial data from a GPS receiver, strips it and parses it to a NTX2 433mhz radio transmitter. Also, it...

[Radio] Baudot

Deze code in C++ laat je radiosignalen uitzenden in baudot (rtty), ik heb dit gebruikt voor mijn ballon-project met een arduino controller. De gewoonlijke ASCII code is in 8 bit; dat betekent 8 ‘beeps’...