Tagged: c#

[Email] with Gmail

This code is a very simple one that you can use to make your C# (Cs or C sharp) application send you an email from any gmail adress. Just make a new gmailadress for...

[Checksum] get XOR Arduino

This code written in C# calculates a simple checksum. You can use this to either verify a checksum or calculate one to append to your string. I have used this checksum for Arduino-to-C# communication...

[Control] 'Klik-aan Klik-uit'

This piece of C++ (Arduino) code is for controlling dutch Klik-aan Klik-uit or KaKu remote controlled powersockets. If it receives @@pwr111*# it switches on and when it receives @@pwr000*# it switches off. With the...

[Checksum] XOR

Rekent een XOR checksum uit in c++ (bijv voor Arduino). Je kunt het gebruiken om ofwel een zin te decoderen of hem aan je zin toe te voegen. Deze zelfde checksum is gebruikt in...

[GPS] + GPRS to FTP to website

I decided to make the “Sherlock I” which essentially is a GPS monitor that parses the info via GPRS to an FTP server, which converts it to a website with a simple PHP script...

[Flightcomputer] HoHoHo 1

This was the flightcomputer (Arduino C++ based) used for This Project. It gets serial data from TWO GPS devices, the atmel processor of the arduino parses it to a NTX2 443mhz radio output, and...

[SMS] Sony Ericsson PDU

For nothing have I had more requests than this piece of code. It’s use is obvious; forcing a turned on Sony Ericsson that supports a real serial interface to send a sms, receive, read,...

[Flightcomputer] HoHoHo 3

This is the flightcomputer for the infamous HoHoHo3 high altitude balloon flight. It uses GPS serial data from a GPS receiver, strips it and parses it to a NTX2 433mhz radio transmitter. Also, it...

[Radio] Baudot

Deze code in C++ laat je radiosignalen uitzenden in baudot (rtty), ik heb dit gebruikt voor mijn ballon-project met een arduino controller. De gewoonlijke ASCII code is in 8 bit; dat betekent 8 ‘beeps’...

[Radio] Hellschreiber with Arduino

This code in C++ produces a radio Hellschreiber output, with characters as input. The characters are (in this code) static, but it is easy to make it dynamic. The code is rough since it...